Home > How to make Elementouch
How to make Elementouch
It can be easily produced with familiar materials. Use as a teaching material is also welcome.
Easy version
It is an unnecessary version of cans. A small element touch can be made by printing one sheet on a transparent sheet (OHP sheet). (If there is no transparent sheet, it may be plain paper.)
Download
*You can change the pattern to your favorite color.
*The 118th element name has been added!
![PDF](../img/icon_pdf.gif)
Word
![WORD](../img/icon_doc.gif)
![簡単バージョン](../img/2001_no8.jpg)
Coffee can version 1 (for 190 ml cans)
This is a version that participants have produced at science events. It can be used as a pen stand.
Download
*You can change the pattern to your favorite color.
*The 118th element name has been added!
Word
![コーヒー缶を使うバージョン](../img/2002_no1.jpg)
How to make
The procedure is as follows.
- Print two types of paper pattern ([sp] on paper, [df] on transparent sheet) and prepare empty cans *, scissors, Sellotape, and so on.
- Divide the pattern df into two (upper: [d], lower: [f]). Please cut the template along the line. sp also has a field for entering a name.
![手順1](../img/procedure_1.jpg)
- It is a coffee can for 190 ml. Please remove the lid with a can opener. Be careful not to hurt your hand at the cut.
![手順2](../img/procedure_2.jpg)
- Secure the end of the [sp] with cellotape and wrap it on the can.
![手順3](../img/procedure_3.jpg)
- Let's paste the border from top to bottom exactly.
![手順4](../img/procedure_4.jpg)
- Fix one end of [d] to the can with Sellotape (Align the atomic numbers in order). Please fix from both front and back.
![手順5](../img/procedure_5.jpg)
- Wrap around the [sp] in a soft and overlapping manner, align both ends of the [d], and secure with sellotape.
![手順6](../img/procedure_6.jpg)
- Fix [f] around [d] in the same procedure as 5-6 (Align atomic numbers in order).
![手順7](../img/procedure_7.jpg)
- It's done. Make sure that the atomic numbers are connected from 1 to 118. It is fun to change the color of the pattern.
![手順8](../img/procedure_8.jpg)
Coffee can version 2 (for 350 ml cans)
- Please "print all over" with the pattern. The entire template fits on A4 size paper.
- Please wind around a 350 ml can according to "Let's make an element touch (PDF)" below.
Download
![PDF](../img/icon_pdf.gif)
![PDF](../img/icon_pdf.gif)
![簡単バージョン](../img/2012_no1.jpg)